Sunday, June 1, 2014

HOW TO ADD AIR TO YOUR TIRES

If your tires appear to be low, check the pressure and note the amount that they’re under-inflated. Then drive to a local gas station and add air. It’s easy, but be sure to bring some change (usually quarters) with you for the air dispenser. (Forget about things being “as free as air” — at many stations it isn’t!)
Follow these steps to add air to your tires:
1. Park your vehicle by the air dispenser.
You will need to reach all four tires with the air hose.
2. Remove the cap from the tire valve on the first tire.
3. Use your tire gauge to check the air pressure in the tire.
Air hose gauges at many gas stations are inaccurate.







Checking your tire pressure.
The pressure will have increased because driving causes the tires to heat up and the air inside them to expand. To avoid over-inflating the tire, no matter what the second reading indicates, you should only add the same amount of air that the tire lacked before you drove it to the station.
4. Use the air hose to add air in short bursts.
Check the pressure after each time with your tire gauge.
If you add too much air, let some out by pressing the pin on the tire valve with the back of the air hose nozzle or with the little knob on the back of the rounded end of the tire gauge.
5. Keep checking the pressure until you get it right.
Don’t get discouraged if you have to keep adjusting the air pressure. No one hits it on the head the first time!


No comments:

Post a Comment